![]() I accessed the wires by removing the passenger side kick panel. In case anybody is interested, here is how this wires in. I only wired it in for keyless remote, no lights or horn honking as lock/unlock indicators. I got the keyless remote system installed. H1/17-Brown/Black unlock #87a normally closed H1/16-Orange (-)500mA ground when armed output H1/14-White/Blue (-)200mA channel 3 validity output H1/10-White (+-/-) Parking light flash output H1/9-Violet unlock #87 normally open (input) H1/8-Blue/Black unlock #87 normally open (input) ![]() H1/7-Violet/Black lock #87 Normally open (input) H1/6-White/Black lock #87 Normally closed H1/4-Black/White Output of domelight supervision relay #30 H1/3-Black/White-1 Input of domelight supervision relay #87 Any help would be appreciated and any input about what wires to connect to get the horn to honk when locked. blue wire and the blue/black wire into the Elky black unlock wire. I patched the violet/black (fused) wire into the Elky lt. The system has power and the box clicks when I push the remote buttons, but nothing happens. I accessed the wires from under the PS kick panel. I tried to follow Magicacorns wiring diagram ( ) but no go. All I want is to install it to lock and unlock the doors and honk the horn when locked. I am having trouble installing the Viper 211HV keyless remote system in my '87 Elky.
0 Comments
Leave a Reply. |